Release : 1.1f 98 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.60 ip address dynamic
This command configures the current VLAN/OOB interface to dynamically acquire an IP address
from the RARP/DHCP Server. The no form of the command resets the IP Address for the
Interface.
ip address { dhcp | rarp}
no ip address
Syntax Description
rarp - RARP Server
dhcp - DHCP Server
Mode
Interface Configuration Mode
This command is applicable in VLAN Interface Mode.
Defaults
dhcp
Example
SMIS(config-if)# ip address dhcp
Related Commands
show ip dhcp client stats - Displays the DHCP client statistics information
release - Releases the DHCP lease on the interface specified
renew - Renews the DHCP lease for the interface specified
To Next Page
Loading...
