Supermicro SSE-G48-TG4 - Show Ip Http Secure Server Status

Release : 1.1f 182 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
7.6 show ip http secure server status
This command displays SSL status and configuration information.
show ip http secure server status
Mode
Privileged EXEC Mode
Example
SMIS# show ip http secure server status
HTTP secure server status : Enabled
HTTP secure server ciphersuite : RSA-DES-SHA:RSA-3DES-SHA:RSAEXP1024-
DES-SHA:
Initially, http secure server, ciphersuite, crypto key must have been configured.
Related Commands
ip http secure - Enables SSL server on the device and also configures ciphersuites and
crypto keys
ssl gen cert-req algo rsa sn - Creates a certificate request using RSA key pair and
subjectName
ssl server-cert - Configures the server cert, input in PEM format
show ssl server-cert - Displays SSL server certificate