Supermicro SSE-G48-TG4 - Show Ip Rip

Release : 1.1f 643 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
25.21 show ip rip
This command displays IP RIP protocol database or statistics.
show ip rip { database [ <ip-address> <ip-mask> ] | statistics }
Syntax Description
database - RIP protocol database for the specified IP address and IP mask of the RIP interface
entry
statistics - RIP statistics on the router
Mode
Privileged EXEC Mode
Example
SMIS# show ip rip database 40.0.0.0 255.0.0.0
40.0.0.0/8 directly connected, vlan1
SMIS# show ip rip statistics
RIP Global Statistics:
----------------------
Total number of route changes is 1
Total number of queries responded is 0
Total number of periodic updates sent is 2
Total number of dropped packets is 0
RIP Interface Statistics:
-------------------------
Interface Periodic BadRoutes Triggered BadPackets Admin
IP Address Updates Sent Rcd Updates Sent Rcd Status
--- --------- ------------ ---------- ------
40.0.0.1 2 0 1 2 Enabled
SMIS# show ip rip database
10.0.0.0/8 [1 ] auto-summary
10.2.0.0/16 [1 ] directly connected, vlan1
30.0.0.0/8 [1 ] auto-summary
30.2.0.0/16 [1 ] directly connected, vlan2