Release : 1.1f 644 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Related Commands
router rip – Enables RIP on all the interfaces
ip rip security – Accepts/ignores RIP1 packets when authentication is in use
ip rip retransmission – Configures the timeout interval and number of retries to
retransmit the
update request packet or an unacknowledged update response packet
network – Enables RIP on an IP network
neighbor – Adds a neighbor router
passive-interface vlan – Suppresses routing updates on an interface
output-delay – Enables interpacket delay for RIP updates
redistribute – Enables redistribution of corresponding protocol routes into RIP
default-metric – Sets the RIP default metric
ip rip send version – Sets IP RIP version number for transmitting advertisements
ip rip receive version – Sets IP RIP version number for receiving advertisements
ip rip authentication mode
– Configures authentication mode and key
timers basic – Sets update, route age and garbage collection timers
ip split-horizon – Sets the spilt horizon status
debug ip rip – Sets the debug level for RIP module
To Next Page
Loading...
