Release : 1.1f 971 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.10 lldp notification
This command configures the lldp notification status and notification types on the interface.
The no form of this command disables the notification on the interface.
lldp notification [remote-table-chg][mis-configuration]
no lldp notification
Syntax Description
remote-table-chg – configures to send SNMP notification when remote table changes
mis-configuration – configures to send SNMP notification when incorrect configuration
detected in the switch
When no options given this command enables lldp notification on the interface.
Mode
Interface Configuration Mode
Defaults
Notification status - disabled
Notification type – mis configuration
Example
SMIS(config-if)# lldp notification remote-table-chg
Related Commands
show lldp interface – Displays the LLDP feature interface configuration.
To Next Page
Loading...
