Release : 1.1f 819 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
30.7 redistribute
This command enables redistribution of IPv6 prefix from another protocol into RIP6 and the no
form of the command disables redistribution of IPv6 prefix from another protocol into RIP6.
redistribute {static|connected|ospf} metric <integer(0-16)>
no redistribute {static|connected|ospf}
Syntax Description
static - Statically configured routes to advertise in the RIP6 process
connected - Connected routes to advertise in the RIP6 process
ospf - OSPF routes to advertise in the RIP6 process
metric - Routing metric associated with the route
Mode
Router Configuration Mode
Example
SMIS(config-router)# redistribute static metric 6
Related Command
show ipv6 rip database – Displays IPv6 Local RIB and routing protocol information
To Next Page
Loading...
