Supermicro SSE-G48-TG4 - Show Etherchannel

Release : 1.1f 289 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
13.8 show etherchannel
This command displays etherchannel information.
show etherchannel [[channel-group-number] { detail | load-balance |
port | port-channel | summary | protocol}]
Syntax Description
channel-groupnumber - Number of the channel group. Valid numbers range from maximum
number of ports in the system to maximum number of aggregations supported
detail - Detailed EtherChannel information
load-balance - Load-balance or frame-distribution scheme among ports in the port channel
port - EtherChannel port information
port-channel - Port-channel information
summary - Protocol that is being used in the EtherChannel
protocol - One-line summary per channel-group
Mode
Privileged EXEC Mode
Example
SMIS# show etherchannel
Port-channel is enabled
Max Port Channels is 24 with maximum 8 active ports per port
channel
Channel Group Listing
---------------------
Group : 1
----------
Protocol : LACP
SMIS# show etherchannel 1 detail
Port-channel is enabled
Max Port Channels is 24 with maximum 8 active ports per port
channel
LACP System Priority: 32768
Channel Group Listing