Supermicro SSE-G48-TG4 - Set Ip Pim Pmbr

Release : 1.1f 541 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.7 set ip pim pmbr
This command enables or disables the PMBR (PIM Multicast Border Router) Status.
set ip pim pmbr { enable | disable }
Syntax Description
enable - Enables the PMBR Status
disable - Disables the PMBR Status
Mode
Global Configuration Mode
Defaults
disable
Example
iss (config)# set ip pim pmbr enable
A PMBR integrates two different PIM domains (either PIM -SM or PIM -DM).
A PMBR connects a PIM domain to other multicast routing domain(s).
Related Command
show ip pim thresholds – Displays threshold configured for SPT, RP thresholds, rate limit
values for both SM