Release : 1.1f 688 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
26.36 show ip ospf request-list
This command displays OSPF Link state request list information.
show ip ospf request-list [<neighbor-id>] [vlan <vlan-id (1-4069)> |
<iftype> <ifnum>]
Syntax Description
neighbor-id - Neighbor router ID
vlan - LSA retransmissions for adjacencies belonging to the VLAN interface
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Example
SMIS# show ip ospf request-list
OSPF Router with ID (20.0.0.2)
Neighbor 10.0.0.1, interface vlan1 address 40.0.0.1
Type LS-ID ADV-RTR SeqNo Age Checksum
---- ---- ------- ----- --- --------
Neighbor 20.0.0.2, interface vlan1 address 40.0.0.2
Type LS-ID ADV-RTR SeqNo Age Checksum
---- ---- ------- ----- --- --------
Related Commands
passive-interface vlan – Suppresses routing updates on an interface
passive-interface default – Suppresses routing updates on all interfaces
To Next Page
Loading...
