Supermicro SSE-G48-TG4 - Snmp-Server Enable Traps Snmp Authentication

Release : 1.1f 459 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
17.10 snmp-server enable traps snmp
authentication
This command enables generation of authentication traps for SNMPv1 and SNMPv2c. The no
form of the command disables generation of authentication traps for SNMPv1 and SNMPv2c.
snmp-server enable traps snmp authentication
no snmp-server enable traps snmp authentication
Mode
Global Configuration Mode
Defaults
Generation of authentication traps is disabled by default.
Example
SMIS(config)# snmp-server enable traps snmp authentication