Release : 1.1f 615 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
24.8 show vrrp
This command displays the VRRP status information.
show vrrp [interface [{ vlan <VlanId(1-4069)> | <interface-type>
<interface-id> }] <VrId(1-255)>] [{brief|detail |statistics}]
Syntax Description
VrId – Any valid VRID number between 1 to 255
interface vlan - VRRP information on the given VLAN ID andVRID
brief - Information about VRRP in brief
detail - Information about VRRP in detail
statistics - VRRP statistics
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Example
SMIS# show vrrp interface vlan 2 detail
vlan2 - vrID 1
---------------
State is Master
Virtual IP address is 12.0.0.2
Virtual MAC address is 00:00:5e:00:01:01
Master router is 12.0.0.2
Associated IpAddresses :
----------------------
12.0.0.2
Advertise time is 1 secs
Current priority is 100
Configured priority is 100, may preempt
vlan2 - vrID 2
---------------
State is Master
Virtual IP address is 12.0.0.1
Virtual MAC address is 00:00:5e:00:01:02
To Next Page
Loading...
