Release : 1.1f 112 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.74 reset interface statistics
This command resets the interface counters to zero for the given interface. If no interface given, it
resets the counters for all the interfaces.
reset interfaces [ <interface-type> <interface-id> ] statistics
Syntax Description
interface-type - Interface type (gigabit-ethernet, extreme-ethernet, qx-ethernet)
interface-id - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Example
SMIS# reset interfaces statistics
Related Command
show interfaces counters - Displays the interface counters
To Next Page
Loading...
