Supermicro SSE-G48-TG4 - Show Ip Dhcp Server Information

Release : 1.1f 440 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
16.3.19 show ip dhcp server information
This command displays the DHCP server information.
show ip dhcp server information
Mode
Privileged EXEC Mode
Example
SMIS# show ip dhcp server information
DHCP server status : Enable
Send Ping Packets : Disable
Debug level : None
Server Address Reuse Timeout : 5 secs
Next Server Adress : 0.0.0.0
Boot file name : None
Related Commands
service dhcp-server - Enables the DHCP server
ip dhcp next-server - Sets the next boot server in the DHCP server configuration
parameters
ip dhcp bootfile - Sets the boot file name in the DHCP server configuration parameters
ip dhcp - Sets the DHCP server parameters such as enabling ICMP echo mechanism or offer-
reuse timeout