Release : 1.1f 554 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.20 ip pim override-interval
This command sets the override interval configured for router interface and the no form of the
command sets the default override interval (0) for router interface.
ip pim override-interval <interval(0-65535)>
no ip pim override-interval
Mode
Interface Configuration Mode
Defaults
0
Example
iss (config-if)# ip pim override-interval 100
Override interval is the random amount of time delayed for sending override messages to
avoid synchronization of override messages when multiple downstream routers share a
multi-access link.
Related Command
show ip pim interface – Displays the routers PIM interfaces
To Next Page
Loading...
