Supermicro SSE-G48-TG4 - Ipv6 Nd Ra-Interval

Release : 1.1f 789 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.15 ipv6 nd ra-interval
This command sets the IPv6 Router Advertisement interval. The no form of the command resets
the IPv6 Router Advertisement interval to its default value.
ipv6 nd ra-interval <interval (4-1800)>
no ipv6 nd ra-interval
Mode
Interface Configuration Mode
Defaults
600 seconds
Example
SMIS(config-if)# ipv6 nd ra-interval 200
Related Commands
show ipv6 interface – Displays the IPv6 interfaces
no ipv6 nd suppress-ra – Enables IPv6 router advertisement