Supermicro SSE-G48-TG4 - Spanning-Tree Restricted-Tcn

Release : 1.1f 212 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
9.16 spanning-tree restricted-tcn
This command enables the topology change guard / restricted TCN feature (prevents the
Topology change caused by that port ) on the port. The no form of the command disables the
topology change guard/ restricted TCN feature on the port.
spanning-tree restricted-tcn
no spanning-tree restricted-tcn
Mode
Interface Configuration Mode
Defaults
Disabled
Example
SMIS(config-if)# spanning-tree restricted-tcn
Related Command
show spanning-tree - Detail - Displays spanning tree information