Supermicro SSE-G48-TG4 - Set Ip Pim Lan-Prune-Delay

Release : 1.1f 556 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.22 set ip pim lan-prune-delay
This command sets the LanPruneDelay bit configured for the router interface to advertise the Lan
delay.
set ip pim lan-prune-delay { enable | disable }
Syntax Description
enable - Enables LAN-prune-delay
disable - Disables LAN-prune-delay
Mode
Interface Configuration Mode
Defaults
disable
Example
iss (config-if)# ip pim lan-prune-delay enable
The command specifies whether to use LAN prune delay or not.
Related Command
show ip pim interface – Displays the routers PIM interfaces