Release : 1.1f 595 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
23.23 show ipv6 pim interface
This command displays the PIMv6 interfaces of the router. It shows the list of Interface
addresses, the mode of the interface, Designated Router on that interface, Hello Interval,
Join/Prune Interval of the interface.
show ipv6 pim interface [{ Vlan <vlan-id> | detail }]
Syntax Description
Vlan - VLAN ID
detail - Detailed information of the interface
Mode
Privileged EXEC Mode
Example
SMIS# show ipv6 pim interface
Address IfName/ Ver/ Nbr Qry DR DR
IfId Mode
Count Interval Address Prio-
--------- ----- ------ ------ ------- ------- -----
fe80::2:a00:1 vlan1/33 2/Sparse 0 150 fe80::2:a00:1 1
fe80::2:1400:1 vlan2/34 2/Sparse 0 30 fe80::2:1400:1 1
fe80::2:1e00:1 vlan3/35 2/Sparse 0 30 fe80::2:1e00:1 1
SMIS# show ipv6 pim interface vlan 1
Address IfName/ Ver/ Nbr Qry DR DR
IfId Mode
Count Interval Address Prio-
--------- ----- ------ ------ ------- ------- -----
fe80::2:a00:1 vlan1/33 2/Sparse 0 150 fe80::2:a00:1 1
SMIS# show ipv6 pim interface detail
vlan1 33 is up
Internet Address is fe80::2:a00:1
Multicast Switching : Enabled
To Next Page
Loading...
