Release : 1.1f 620 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
24.10 debug vrrp
This command enables the display of link aggregation debug messages.
The no form of this command disables the display of link aggregation debug messages.
debug vrrp {all | all-pkt-dump | state-machine | resource | ip-pkt-dump
| timer }
no debug vrrp {all | all-pkt-dump | state-machine | resource | ip-pkt-
dump | timer}
Syntax Description
all – displays all debug messages
all-pkt-dump – displays the contents of all VRRP packets
state-machine – displays the state machine transition debug messages
resource – displays the resources (like memory) utilization debug messages
ip-pkt-dump – displays the contents of all VRRP IP packets
timer – displays the timer start and expiry related debug messages
Mode
Privileged/User EXEC Mode
Defaults
Disabled
Example
SMIS# debug vrrp all
Related Commands
To Next Page
Loading...
