Release : 1.1f 619 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Zero Priority Packets Received : 0
Zero Priority Packets Sent : 0
Invalid Type Packets Received : 0
Address List Errors : 0
Invalid Authentication Type : 0
Authentication Type Mismatch : 0
Packet Length Errors : 0
SMIS# show vrrp interface vlan 2
P indicates configured to preempt
Interface vrID Priority P State Master VRouter
Addr Addr
--------- ---- -------- - ----- ------- -------
vlan2 1 100 P Master local 12.0.0.2
vlan2 2 255 P Master local 12.0.0.1
Related Commands
router vrrp – Enables VRRP in the router
interface – Selects an interface to configure
vrrp - ip address – Sets the IP address for the virtual router
To Next Page
Loading...
