Supermicro SSE-G48-TG4 - Show Ipv6 Rip Database

Release : 1.1f 822 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
30.10 show ipv6 rip database
This command displays IPv6 Local RIB and routing protocol information.
show ipv6 rip [ database ]
Syntax Description
database - IPv6 RIP protocol database
Mode
Privileged EXEC Mode
Example
SMIS# show ipv6 rip database
RIP local RIB
4444::/64, metric 10, local
vlan1/::, expires in 180 secs
5555::/64, metric 10, local
vlan2/::, expires in 180 secs
6666::/64, metric 7, static
Related Commands
ipv6 router rip – Enables the router configuration mode
ipv6 split-horizon – Enables the split horizon updates
ipv6 rip enable – Enables RIP Routing
ipv6 poison reverse – Enables poison reverse
ipv6 rip default-information originate – Configures handling of default route
originate
ipv6 rip metric-offset – Adjusts default metric increment
redistribute – Redistributes IPv6 prefix from another protocol into RIP6
distribute prefix – Enables Filter network in routing updates sent or received
debug ipv6 rip – Enables IPv6 RIP routing protocol debugging