Release : 1.1f 94 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.56 interface range
This command selects multiple interfaces to configure, which can be a physical interfaces or port-
channel interfaces or a VLAN interfaces or loopback interfaces. The no form of this command is
used to delete multiple VLAN / port-channel or loopback interfaces. On execution of this
command, the user enters the interface configuration mode.
interface range <iflist_string>
no interface range <iflist_string>
Syntax Description
iflist_string – List of one or more interface ranges. To provide a range use a hypen (-)
between the start and end interface numbers.
E.g.: int range gi 0/1-10
To provide multiple interfaces or ranges, use separate with a comma (,).
E.g.: int range gi 0/1-10, gi 0/20
Mode
Global Configuration Mode
Related Command
show interfaces - Displays the interface status and configuration
To Next Page
Loading...
