Supermicro SSE-G48-TG4 - Debug Nm

Release : 1.1f 57 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.20 debug nm
This command enables the display of debug messages for web module. The no form of this
command disables the debug messages for web interface module.
debug nm [{all | info | errors | mgmt | data}]
no debug nm [{all | info | errors | mgmt | data}]
Syntax Description
all – Enables all the available debug messages of web module
info – Enables only the informative debug messages of web module
errors – Enables only the error messages of web module
mgmt – Enables only the management control debug messages of web module
data – Enables only the packet data related debug messages of web module
Mode
Privileged EXEC Mode
Example
SMIS# debug nm all
Related Command