Release : 1.1f 364 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
15.26 vlan restricted
This command enables/disables restricted VLAN registration on the port.
vlan restricted {enable | disable}
Syntax Description
enable - Enables restricted VLAN registration
disable - Disables restricted VLAN registration
Mode
Interface Configuration Mode
Defaults
disable
Example
SMIS(config-if)# vlan restricted enable
If restricted VLAN registration rules are enabled, then a VLAN is learnt dynamically from
the GVRP frame only if the specific VLAN is statically configured in the switch. If
restricted VLAN registration rules are disabled, then GVRP packets are processed
normally and the VLANs are learnt dynamically even if they are not statically configured
in the switch.
Related Command
show vlan port config - Displays the VLAN related parameters specific for ports
To Next Page
Loading...
