Supermicro SSE-G48-TG4 - Show Ipv6 Ospf Border-Routers

Release : 1.1f 877 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.44 show ipv6 ospf border-routers
This command displays the internal OSPFv3 routing table entries to an ABR/ASBR.
show ipv6 ospf border-routers
Mode
User/Privileged EXEC Mode
Example
SMIS# show ipv6 ospf border-routers
OSPFv3 Process Border Router Information
Destination Type NextHop Cost Rt Area
Type Id
11.0.0.2 ABR fe80::211:22ff:fe33:4412 10 intraArea 0.0.0.0
11.0.0.2 ABR fe80::211:22ff:fe33:4422 10 intraArea 0.0.0.1
11.0.0.2 ASBR fe80::211:22ff:fe33:4412 10 intraArea 0.0.0.0
11.0.0.2 ASBR fe80::211:22ff:fe33:4422 10 intraArea 0.0.0.0
Related Commands
abr-type – Sets the ABR (Area Border Router) type
ASBR Router – Configures the router as an ASBR