Release : 1.1f 806 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
29.1 export ospfv3
This command enables redistribution of OSPF area/External routes to the protocol. The no form
of the command disables redistribution of OSPF area/External routes to the protocol.
export ospfv3 {area-route|external-route} {rip}
no export ospfv3 {area-route|external-route} {rip}
Syntax Description
area-route - OSPFv3 inter-area and intra-area address/mask pairs to be exported into the
routing protocol
external-route - OSPFv3 Type 1 and Type 2 External address/mask pairs to be exported
into the routing protocol
rip - Routing Information Protocol
Mode
Global Configuration Mode
Example
SMIS(config)# export ospfv3 area-route rip
Related Command
show redistribute information ipv6 – Displays the RTM6 RRD status for registered
protocols
To Next Page
Loading...
