Supermicro SSE-G48-TG4 - Show Ipv6 Route

Release : 1.1f 800 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.24 show ipv6 route
This command displays the IPv6 Routes.
show ipv6 route
Mode
Privileged EXEC Mode
Example
SMIS# show ipv6 route
IPv6 Routing Table - 4 entries
Codes : C - Connected, S - Static
O - OSPF, R - RIP, B - BGP
C 2222::/64 [1/1]
via ::, vlan1
C 2223:1:2:3::/64 [1/1]
via ::, vlan1
S 4444::/64 [1/20]
via 2222::2222, vlan1
S 4445::/64 [1/20]
via 2222::2222, vlan1
Related Command
ipv6 - static routes – Configures static routes