Supermicro SSE-G48-TG4 - Show Ipv6 Ospf - Area-Range; Summary-Prefix

Release : 1.1f 878 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.45 show ipv6 ospf - area-range / summary-
prefix
This command displays either the list of all area address ranges information or all external
summary address configuration information.
show ipv6 ospf { area-range | summary-prefix }
Syntax Description
area-range - Area associated with the OSPFv3 address range
summary-prefix - Aggregate addresses for OSPFv3
Mode
User/Privileged EXEC Mode
Example
SMIS# show ipv6 ospf area-range
OSPFv3 Summary Address Configuration Information
Network Pfx LSA Area Effect Tag
Length Type
3ffe::100:0:0:0 80 Summary 0.0.0.0 advertise 0
3ffe::110:0:0:0 80 Summary 0.0.0.0 doNotAdvertise 0
3ffe::120:0:0:0 80 Summary 0.0.0.1 advertise 0
3ffe::130:0:0:0 80 Type7 0.0.0.1 advertise 0
SMIS# show ipv6 ospf summary-prefix
OSPFv3 External Summary Address Configuration Information
Prefix Pfx Area Effect TranslationState
Length
3ffe::200:0:0:0 80 0.0.0.0 advertise enabled
3ffe::210:0:0:0 80 0.0.0.0 advertise disabled
3ffe::220:0:0:0 80 0.0.0.0 doNotAdvertise enabled
3ffe::230:0:0:0 80 0.0.0.0 allowAll enabled
3ffe::240:0:0:0 80 0.0.0.0 denyAll enabled
Related Commands
area - range – Creates the Internal Aggregation Address Range