Release : 1.1f 344 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
15.8 mac-vlan
This command configures the VLAN-MAC address mapping. The no form of this command is
used to delete the specific vlan mac mapping entry.
mac-vlan <aa:aa:aa:aa:aa:aa> vlan <vlan-id(1-4069)>
no mac-vlan <aa:aa:aa:aa:aa:aa>
Syntax Description
aa:aa:aa:aa:aa:aa - MAC address
vlan - VLAN Identifier
Mode
Global Configuration Mode
Example
SMIS(config)# mac-vlan 00:11:22:33:44:55 vlan 2
Related Commands
show mac-vlan - Displays the entries in the MAC-VLAN database
To Next Page
Loading...
