Release : 1.1f 476 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
17.25 show snmp targetparam
This command displays the configured SNMP Target Address Params.
show snmp targetparam
Mode
Privileged EXEC Mode
Example
SMIS# show snmp targetparam
Target Parameter Name : internet
Message Processing Model : v2c
Security Model : v2c
Security Name : none
Security Level : No Authenitcation, No Privacy
Storage Type : Volatile
Row Status : Active
------------------------------
Target Parameter Name : test1
Message Processing Model : v2c
Security Model : v1
Security Name : none
Security Level : No Authenitcation, No Privacy
Storage Type : Volatile
Row Status : Active
------------------------------
Related Commands
snmp targetparams - Configures the SNMP target parameters
snmp user - Configures the SNMP user details
To Next Page
Loading...
