Supermicro SSE-G48-TG4 - Show Ip Pim Interface

Release : 1.1f 559 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
22.25 show ip pim interface
This command displays the routers PIM interfaces.
show ip pim interface [{ Vlan <vlan-id> | <iftype> <ifnum> | detail }]
Syntax Description
Vlan - VLAN ID
detail - Detailed information of the interface
iftype - Interface type, can either be a gi, ex or qx ethernet interfaces
ifnum - Physical interface ID including slot and port number
Mode
Privileged EXEC Mode
Example
SMIS# show ip pim interface
Address IfName/IfId Ver/Mode
Nbr Qry DR-Address DR-Pr
Count Interval
10.0.0.1 vlan1/160 2/Sparse 0 45 10.0.0.1 5
20.0.0.1 vlan2/33 2/Sparse 0 30 20.0.0.1 1
30.0.0.1 vlan3/34 2/Sparse 0 60 30.0.0.1 1
SMIS# show ip pim interface vlan 1
Address IfName/IfId Ver/Mode
Nbr Qry DR-Address DR-Pr
Count Interval
10.0.0.1 vlan1/160 2/Sparse 0 45 10.0.0.1 5
SMIS# show ip pim interface detail
vlan1 160 is up
Internet Address is 10.0.0.1
Multicast Switching : Enabled
PIM: enabled
PIM version: 2, mode