Supermicro SSE-G48-TG4 - Show Ipv6 Ospf Neighbor

Release : 1.1f 874 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.41 show ipv6 ospf neighbor
This command displays OSPFv3 neighbor information.
show ipv6 ospf neighbor [ <Neighbor-RouterID> ]
Mode
User/Privileged EXEC Mode
Example
SMIS# show ipv6 ospf neighbor
ID Pri State Dead Address
Time
11.0.0.4 1 FULL/PTOP 31 fe80::211:22ff:fe33:4434
11.0.0.5 10 FULL/BACKUP 35 fe80::260:83ff:fe38:8aa2
Related Command
ipv6 ospf neighbor – Configures a neighbor on non-broadcast networks and sets the
priority value for the neighbor if specified