Release : 1.1f 748 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.40 debug ip bgp
This command configures the Trace levels. The no form of the command resets the Trace levels.
debug ip bgp {peer | update | fdb | keep | in | out | damp | events |
all }
no debug ip bgp {peer | update | fdb | keep | in | out | damp | events
| all}
Syntax Description
peer - Trace code related to peer processing
update - Trace code related to update processing
fdb - Trace code related to FIB updation
keep - Trace code related to keep-alives
in - Trace code related to incoming messages
out - Trace code related to outgoing messages
damp - Trace code related to dampening parameters
events - Trace code related to BGP event processing
all - All the BGP trace code
Mode
Privileged EXEC Mode
Example
SMIS# debug ip bgp peer
BGP Speaker Local AS number must be configured.
Related Command
router bgp – Sets the AS number of the BGP Speaker
To Next Page
Loading...
