Release : 1.1f 709 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.4 ip bgp synchronization
This command enables synchronization between BGP and IGP and the no form of the command
disables synchronization between BGP and IGP.
ip bgp synchronization
no ip bgp synchronization
Mode
Global Configuration Mode
Defaults
Disable
Example
SMIS(config)# ip bgp synchronization
BGP Speaker Local AS number must be configured.
BGP must be administratively down.
Related Commands
router bgp – Sets the AS number of the BGP Speaker
show ip bgp info – Displays the general info about BGP protocol
shutdown ip bgp – Sets the BGP Speaker Global Admin status DOWN
To Next Page
Loading...
