Supermicro SSE-G48-TG4 - Show Spanning-Tree Mst Configuration

Release : 1.1f 241 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
9.30 show spanning-tree mst configuration
This command displays multiple spanning tree instance configuration.
show spanning-tree mst configuration
Syntax Description
Mode
Privileged EXEC Mode
Example
Single Instance:
SMIS# show spanning-tree mst configuration
Name [fsoft]
Revision 2
Instance Vlans mapped
-------- ------------------------------------------
0 1,3-1024,1025-2048,2049-3072,
3073-4069
1 2
-------------------------------------------------------
Multiple Instance:
SMIS# show spanning-tree mst configuration
Switch - default
Name [00:01:02:03:04:01]
Revision 0
Instance Vlans mapped
-------- ------------------------------------------
0 1-1024,1025-2048,2049-3072,3073-4069
-------------------------------------------------------
Switch - cust1
Name [00:01:02:03:04:02]
Revision 0
Instance Vlans mapped
-------- ------------------------------------------
0 1-1024,1025-2048,2049-3072,3073-4069