Release : 1.1f 30 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3 System Features
SMIS offers a rich set of system features to a user, such as, login services, copying/writing
facilities, duplex/negotiation support, and many other capabilities. Some features might have
special hardware requirements and others might have special design considerations. The related
command links provide overview descriptions of the features and includes specific information to
consider when using these features.
Management IP Commands
Command Description
ip address dhcp This command configures the mode by which
the default interface acquires its IP address.
ip address This command configures the IP address and
subnet mask for the default interface.
ip gateway This command configures the gateway IP
address for the default management interface.
Management Access Commands
Command Description
login authentication This command sets the authentication method
for user logins and the no form of the command
sets the authentication method for user logins
to default values.
username This command creates a user and sets the
enable password for that user with the privilege
level. The no form of the command deletes a
user and disables the enable password for that
user.
listuser This command lists all valid users, along with
their permissible mode.
show users This command displays information about
terminal lines.
show privilege This command shows current user privilege
level.
enable password This command modifies enable password
To Next Page
Loading...
