Release : 1.1f 31 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
parameters and the no form of the command
disables enable password parameters.
enable This command turns on privileged commands.
disable This command turns off privileged commands.
logout This command exits from Privileged EXEC/
User EXEC mode to ISS Login Prompt in case
of console session.
lock This command locks the CLI console. It allows
the user/system administrator to lock the
console to prevent unauthorized users from
gaining access to the CLI command shell.
ip http port This command sets the HTTP port and the no
form of the command resets the HTTP port.
set ip http This command enables/disables HTTP.
web session-timeout
This command configures the idle timeout
value for web management sessions.
show http server status This command displays the http server status.
authorized-manager ip-source This command configures an IP authorized
manager and the no form of the command
removes manager from authorized managers
list.
show authorized-managers This command displays the configured
authorized managers.
debug nm This command enables the display of debug
messages for web interface module.
CLI Helping Commands
Command Description
configure terminal This command enters the configuration mode.
exit This command exits the current configuration
mode to the next highest configuration mode in
the CLI.
end This command exits from Configuration mode.
To Next Page
Loading...
