Release : 1.1f 531 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
21.5 show ip dvmrp
This command displays the DVMRP details.
show ip dvmrp { routes [ vlan <vlan-id(1-4069)> ] | mroutes | nexthop |
neighbor | info | prune }
Syntax Description
routes - Unicast Routes for VLAN ID
mroutes - Multicast Routes
nexthop - Nexthop Routes
neighbor - DVMRP neighbors
info - Information
prune - Prune
Mode
Privileged EXEC Mode
Example
SMIS# show ip dvmrp routes
Dvmrp Routing Table
-------------------
2.0.0.0/8[2] uptime [0d 20:49:41.00], expires [0d 00:01:50.00]
Status: Active
via 10.0.0.2, vlan1
10.0.0.0/8[1] uptime [0d 22:20:00.00], expires [0d 00:02:00.00]
Status: Local/NeverExpire
via 10.0.0.1, vlan1
SMIS# show ip dvmrp mroutes
Dvmrp Forward Information
--------------------------
(2.0.0.0, 227.1.1.1)
Reverse Path Forwarding Neighbor/Interface : 10.0.0.2/(vlan1)
Interface State of Upstream neighbor : PRUNED Expiry Time :
6000
To Next Page
Loading...
