Release : 1.1f 532 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
SMIS# show ip dvmrp nexthop
Dvmrp NextHop Information
---------------------------
SrcAddress/Mask : 2.0.0.0/255.0.0.0
NextHopIndex : 160 (vlan1), IfType : Branch, DF: True
Dependent Nbrs :10.0.0.1
SMIS# show ip dvmrp neighbor
Neighbour Information
------------------------
Neighbor Interface Up Exp GenId Adjacency
Address Time Time
--------- --------- ---------- ------- ------ ---------
10.0.0.2 vlan1 [0d 22:31:48.00] 3400 133 ESTABLISHED
SMIS# show ip dvmrp info
DVMRP is enabled in the switch
Dvmrp Version:0x3 (major) 0xff (minor)
GenerationId: 0, Total Routes: 0, Reachable Routes: 0
Prune Life Time: 50
Interface Information
------------------------
IfaceName/Id Address Metric AdminStatus
-------------- ---------- ------ -----------
vlan1/160 10.0.0.1 1 DVMRP_ENABLED
SMIS# show ip dvmrp prune
Prune List :
NbrAddress/PruneTime : 20.0.0.20/28
NbrAddress/PruneTime : 20.0.0.10/38
Related Commands
set ip dvmrp – Enables / disables DVMRP in the switch
ip dvmrp prune-life-time – Sets the prune life time value
set ip dvmrp - interface – Enables DVMRP in the interface
debug ip dvmrp – Enables debugging support for DVMRP
To Next Page
Loading...
