Release : 1.1f 435 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Network pool must be configured prior to the execution of this command. Only then the
configured option will be visible to the user in the show command output. If the network
pool is deleted, then the option configured for that network pool will also get deleted.
Related Commands
service dhcp-server - Enables the DHCP server
ip dhcp pool - Creates a DHCP server address pool and places the user in the DHCP pool
configuration mode
ip dhcp option - Sets the DHCP server options
network - Sets the network IP and mask in DHCP server configuration parameters
show ip dhcp server pools - Displays the DHCP server pools
To Next Page
Loading...
