Release : 1.1f 392 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Static Unicast Address Count : 0
Static Multicast Address Count : 0
----------------------------------------
Mac Entries for Vlan 20:
--------------------------
Dynamic Unicast Address Count : 0
Dynamic Multicast Address Count : 0
Static Unicast Address Count : 0
Static Multicast Address Count : 0
----------------------------------------
Mac Entries for Vlan 30:
--------------------------
Dynamic Unicast Address Count : 0
Dynamic Multicast Address Count : 0
Static Unicast Address Count : 0
Static Multicast Address Count : 0
----------------------------------------
If executed without the optional parameter this command displays the MAC addresses
present on all the VLANs.
Related Commands
vlan - Configures a VLAN in the switch and is also used to enter in to the config-VLAN mode
ports - Configures a static VLAN entry with the required member ports, untagged ports and
forbidden ports
mac-address-table static unicast - Configures a static unicast MAC address in the
forwarding database
mac-address-table static multicast - Configures a static multicast MAC address in the
forwarding database
To Next Page
Loading...
