Release : 1.1f 598 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
ipv6 pim query-interval – Sets the frequency at which PIMv6 hello messages are
transmitted on the interface
ipv6 pim message-interval – Sets the frequency at which PIMv6 Join/Prune messages
are transmitted on the PIMv6 interface
ipv6 pim bsr-candidate – Sets the preference value for the local PIMv6 interface as a
candidate bootstrap router
ipv6 pim hello-holdtime – Sets the holdtime for the hello message for the PIMv6 interface
To Next Page
Loading...
