Release : 1.1f 768 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
80000 deny
Outgoing Filter Table
CommValue FilterStatus
--------- -------------
75000 accept
85000 deny
SMIS# show ip bgp community policy
Community Policy Table
Prefix PrefixLen SendStatus
------ --------- -----------
20.0.0.0 8 set-add
30.0.0.0 8 set-none
40.0.0.0 8 modify
SMIS# show ip bgp community peer
Community Peer Table
IpAddress SendStatus
--------- -----------
10.0.0.2 send
10.0.0.3 donotsend
10.0.0.6 send
10.0.0.8 send
BGP Speaker Local AS number must be configured.
Related Commands
bgp comm-route – Configures an entry in additive or delete community table
bgp comm-peer – Enables/disables advertisement of community attributes to peer
bgp comm-filter – Allows/filters the community attribute while receiving or advertising
bgp comm-policy – Configures the community attribute advertisement policy for specific
destination
neighbor - send-community – Enables advertisement of community attributes to
(standard/extended) peer
To Next Page
Loading...
