Release : 1.1f 450 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
SMIS(config)# snmp access myv2group v2 read v2readview write
v2writeview notify v2notifyview nonvolatile
To configure an SNMP access along with the group, a group must have already been
created using the snmp group command.
Version 3 is the most secure mode as it allows packet encryption with the priv key word.
Related Commands
snmp group - Configures SNMP group details
snmp view - Configures the SNMP view
show snmp group - Displays the configured SNMP groups
show snmp group access - Displays the configured SNMP group access details
show snmp viewtree - Displays the configured SNMP Tree views
To Next Page
Loading...
