Release : 1.1f 193 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
0 CRC alignment errors and 0 collisions,
# of dropped packet events is 0
Network utilization is estimated at 0
Sample 2 began measuring at 0
Received 0 octets, 0 packets,
0 broadcast and 0 multicast packets,
0 undersized and 0 oversized packets,
0 fragments and 0 jabbers,
0 CRC alignment errors and 0 collisions,
# of dropped packet events is 0
Network utilization is estimated at 0
SMIS# show rmon history overview
RMON is enabled
Entry 1 is active, and owned by fsoft
Monitors ifEntry.1.1 every 3000 second(s)
Requested # of time intervals, ie buckets, is 3,
Granted # of time intervals, ie buckets, is 3
If the show rmon command is executed with out enabling the RMON feature, then the following
output is displayed
SMIS# show rmon
RMON feature is disabled
Related Commands
set rmon - Enables or disables the RMON feature
rmon collection history - Enables history collection of interface statistics in the buckets
for the specified time interval
rmon collection stats - Enables RMON statistic collection on the interface
rmon event - Adds an event to the RMON event table
rmon alarm - Sets an alarm on a MIB object
To Next Page
Loading...
