Release : 1.1f 225 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Multiple Instance:
SMIS# show spanning-tree detail switch default
Switch default
MST00 is executing the mstp compatible Multiple Spanning
Tree Protocol
Bridge Identifier has Priority 32768, Address
00:51:02:03:04:05
Configured Max age 20 sec, Forward delay 15 sec
Configured Hello Time 2 sec
We are root of the spanning tree
Current Root has priority 32768, address 00:51:02:03:04:05
cost of root path is 0
Number of Topology Changes 1, Time since topology Change 82
seconds ago
Transmit Hold-Count 3
Times : Max age 20 Sec,Forward delay 15 Sec
Port 1 [Gi0/1] of MST00 is Designated, Forwarding
Gi0/1 is operating in the MSTP Mode
Port path cost 200000, Port priority 128,
Port Identifier 128.1. Port HelloTime 2,
Timers: Hello - 0, Forward Delay - 0, Topology Change - 0
Designated root has priority 32768, address
00:51:02:03:04:05
Designated Bridge has priority 32768, address
00:51:02:03:04:05
Designated Port Id is 128.1, Designated pathcost is 0
Operational Forward delay 15, Max age 20
Number of Transitions to forwarding State : 1
PortFast is disabled
Link Type is Shared
BPDUs : sent 58, recieved 0
Restricted Role is disabled.
Restricted TCN is disabled.
Related Commands
spanning-tree mode - Sets the spanning tree operating mode
To Next Page
Loading...
