Supermicro SSE-G48-TG4 - Page 264

Release : 1.1f 264 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Protocol : 4
Timeout : 0 seconds
Ports : Gi0/1, Gi0/2, Gi0/3, Gi0/4, Gi0/5, Gi0/6, Gi0/7,
Gi0/8, Gi0/9,
Gi0/10, Gi0/11, Gi0/12, Gi0/13, Gi0/14, Gi0/15, Gi0/16, Gi0/17,
Gi0/18, Gi0/19,
Gi0/20, Gi0/21, Gi0/22, Gi0/23, Gi0/24
Permission : Allow
---------------------------------
SMIS# show dot1x all
When access-control is made inactive for Gi0/1 and Gi0/2:
Dot1x Info for Gi0/1
---------------------
PortStatus = AUTHORIZED
AccessControl = INACTIVE
AuthSM State = FORCE AUTHORIZED
BendSM State = INITIALIZE
AuthPortStatus = AUTHORIZED
ControlDirection = BOTH
MaxReq = 2
Port Control = Force Authorized
QuietPeriod = 60 Seconds
Re-authentication = Disabled
ReAuthPeriod = 3600 Seconds
ServerTimeout = 30 Seconds
SuppTimeout = 30 Seconds
Tx Period = 30 Seconds
Dot1x Info for Gi0/2
---------------------
PortStatus = AUTHORIZED
AccessControl = INACTIVE
AuthSM State = INITIALIZE
BendSM State = INITIALIZE
AuthPortStatus = AUTHORIZED
ControlDirection = BOTH
MaxReq = 2