Release : 1.1f 296 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
-------------------
Number of Ports = 2
HotStandBy port = null
Port state = Port-channel Ag-Inuse
Protocol = LACP
MAC selection = Dynamic
Expressions are case sensitive.
The port-channel range is 1 to 64.
Related Commands
set port-channel - Enables/disables link aggregation in the switch
channel-group - Assigns an Ethernet interface to an EtherChannel group
port-channel load-balance - Sets the load balancing policy
lacp port-priority - Sets the LACP port priority
lacp wait-time - Sets the LACP wait-time
lacp timeout - Sets the LACP timeout period
show etherchannel - Displays etherchannel information
To Next Page
Loading...
