EasyManua.ls Logo

Supermicro SSE-G48-TG4 - Page 325

Supermicro SSE-G48-TG4
985 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Release : 1.1f 325 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Switch cust2
Snooping VLAN Configuration for the VLAN 1
IGMP Snooping enabled
IGMP configured version is V2
IGMP Operating version is V2
Fast leave is disabled
Snooping switch is acting as Non-Querier
Query interval is 125 seconds
Snooping VLAN Configuration for the VLAN 2
IGMP Snooping enabled
IGMP configured version is V2
IGMP Operating version is V2
Fast leave is disabled
Snooping switch is acting as Non-Querier
Query interval is 125 seconds
Related Commands
ip igmp snooping - Enables IGMP snooping in the switch/a specific VLAN
ip igmp snooping version - Specifies the IGMP snooping operating mode
of switch
ip igmp snooping fast-leave - Enables fast leave processing for a specific VLAN
ip igmp snooping querier - Configures the IGMP snooping switch as a querier for a
specific VLAN
ip igmp snooping query-interval - Sets the time period with which the general queries
are sent by the IGMP snooping switch when configured as querier on a VLAN

Table of Contents

Other manuals for Supermicro SSE-G48-TG4

Related product manuals