Release : 1.1f 372 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
If the optional parameter is not specified then this command displays the VLAN
information of all the available interfaces.
Related Commands
shutdown vlan - Shuts down VLAN switching. The no form of the command starts and
enables
VLAN switching
set vlan - Enables/disables VLAN in the switch
vlan - Configures a VLAN in the switch and is also used to enter in to the config-VLAN mode
ports - Configures a static VLAN entry with the required member ports, untagged ports and
forbidden ports
To Next Page
Loading...
